What types of fusion machines do you rent?
We rent butt fusion machines, socket fusion tools, and electrofusion processors. Butt fusion covers the majority of HDPE pipeline work — straight pipe joining on mainline runs. Socket fusion is for smaller diameter service lines. Electrofusion is used for confined space repairs, directional drill tie-ins, saddle connections, and branch taps where butt fusion isn’t practical.
What pipe sizes can your rental machines handle?
Our fleet covers pipe from 2″ through 63″ OD. Small diameter handpump machines handle 2″–8″. Mid-range machines cover 4″–12″. Larger rolling and track-mounted machines cover 6″–18″, 6″–30″, and up to 63″ for major pipeline work. Tell us your pipe OD and we’ll match you to the right unit.
Do you deliver the machine to the job site?
Yes. We deliver directly to job sites across Texas from our La Porte and Seguin locations. We serve the Gulf Coast, Eagle Ford Shale, Houston metro, San Antonio, Corpus Christi, Victoria, and surrounding regions. Contact us with your location and project start date to coordinate delivery.
What are your rental rates and minimum rental period?
Rates vary based on machine size and rental duration. Daily, weekly, and monthly terms are available — weekly and monthly rates offer the best per-day value for longer projects. Standard machines for pipe up to 12″ are priced differently than larger track-mounted equipment. Call us at 888-841-7954 for a same-day quote.
What accessories are available with the rental?
Pipe rollers, pipe stands, in-ditch kits, portable generators, and data loggers are available to accompany your rental. Data loggers record fusion parameters including heat soak times, fusion pressure, and cool time — useful for quality control documentation on projects requiring ASTM compliance. Let us know your project requirements when you call.
What is butt fusion and when is it used?
Butt fusion is the most common method for joining HDPE pipe. The pipe ends are heated on a flat plate until they reach fusion temperature, then pressed together under controlled pressure to form a seamless, permanent joint. It’s the standard joining method for mainline oil & gas gathering, water distribution, and industrial piping. It creates a joint as strong as — or stronger than — the pipe itself. Learn more about HDPE pipe and joining methods.
What is electrofusion and when should I use it instead of butt fusion?
Electrofusion uses fittings with embedded heating wire. The fitting is placed over the pipe ends and an electrical current heats the wire, fusing the fitting to the pipe from the inside. It’s preferred for confined spaces, repairs in the field, directional drill tie-ins, branch saddle connections, and installations where a butt fusion machine can’t be positioned. It requires less space and less equipment than butt fusion but is generally slower for long runs.
Do I need experience to operate a fusion machine?
Basic operator experience is strongly recommended for reliable joint quality. Improper fusion — wrong heat soak time, incorrect pressure, contaminated pipe ends — can result in joint failure. If your crew is new to HDPE fusion, contact us to discuss training options and support resources before your project starts.
How do I know which machine size I need?
Machine size is driven by your pipe’s outer diameter (OD), not the nominal size. A 6″ IPS pipe has a different OD than a 6″ DIPS pipe, so confirm whether your pipe is IPS or DIPS before specifying a machine. Wall thickness (DR rating) also matters for setting correct fusion pressure. If you’re unsure, call us with your pipe specs and we’ll recommend the right machine.
Can I rent a fusion machine and buy HDPE pipe from you at the same time?
Yes — and most of our customers do exactly that. We supply HDPE DR11 pipe, DR17 pipe, and other ratings from 2″ to 60″. Getting both from one supplier means one call, one delivery coordination, and guaranteed compatibility between the pipe and the machine. Ask about combined pipe and rental orders when you call.
Is the equipment inspected before rental?
Yes. All machines in our rental fleet are inspected and confirmed field-ready before going out. We check hydraulics, facer, heater, jaws, and carriage function before delivery so you’re not troubleshooting equipment on the job site.
What happens if the machine breaks down on the job site?
Call us at 888-841-7954. Our team is available 24/7. We’ll troubleshoot with you by phone first, and if the machine needs to be swapped out we’ll work to get a replacement to you as fast as possible. Minimizing your downtime is the priority.
Do you rent squeeze tools and other HDPE accessories?
Contact us about availability. In addition to fusion machines we can discuss squeeze tools, pipe rollers, and other accessories depending on your project needs. View our full range of industrial supply services or get a quote today.
