Spiral Wound Gaskets for Oil and Gas Systems
Spiral Wound Gaskets for Refining and Petrochemical Plants
Spiral Wound Gaskets for Power Generation and Steam Systems
Spiral Wound Gaskets for Chemical Processing Applications
Spiral Wound Gaskets for Manufacturing Applications
Spiral Wound Gaskets for Oil and Gas Systems
Spiral Wound Gaskets for Oil and Gas Systems
Wellsite, pipeline, and processing flanges see high pressure, hydrocarbons, and frequent thermal cycling. Spiral wound gaskets are a standard choice for these carbon steel joints because the winding recovers as the joint moves.
Sour or high-temperature service may call for specific winding and filler materials, so tell us the media and operating temperature. For the highest pressure classes, look at ring type joint gaskets instead.
Spiral Wound Gaskets for Refining and Petrochemical Plants
Spiral Wound Gaskets for Refining and Petrochemical Plants
Refineries and petrochemical units run hot hydrocarbons, steam, and process chemicals through carbon steel piping. A graphite filled spiral wound gasket handles the heat and thermal cycling that cause flat gaskets to fail.
Stainless steel windings suit most service, and other alloys are available for aggressive media. Confirm the fluid, temperature, and pressure class before ordering.
Spiral Wound Gaskets for Power Generation and Steam Systems
Spiral Wound Gaskets for Power Generation and Steam Systems
Steam lines, feedwater piping, and boiler connections cycle through wide temperature swings. Spiral wound gaskets keep the seal on carbon steel flanges through those cycles, and graphite filler tolerates steam and heat.
Bolt torque and tightening sequence matter on these joints. Ask us about the seating requirements for your flange and winding combination.
Spiral Wound Gaskets for Chemical Processing Applications
Spiral Wound Gaskets for Chemical Processing Applications
Chemical plants choose the filler to match the media: graphite for high heat, PTFE for broad chemical resistance. The metal winding adds strength, so the gasket holds where soft sheet materials extrude.
Strong oxidizing acids attack graphite, and PTFE has temperature limits. Share your media, concentration, and temperature, and we will confirm the filler.
Spiral Wound Gaskets for Manufacturing Applications
Spiral Wound Gaskets for Manufacturing Applications
Plants with high-pressure steam, hot oil, and compressed gas lines use spiral wound gaskets on carbon steel flanges where reliability matters and downtime is costly.
Matching the gasket to the flange face finish and bolt load prevents repeat leaks. Our team can help you review those details before you order.